Michael Sealy, an assistant professor at the University of Nebraska-Lincoln, has developed a novel approach to a decades-long quest: creating dissolvable medical implants that can be tailored to different patients and purposes. “Instead of having these permanent metal implants, let’s have one that degrades over time,” he said. “Let’s eliminate this whole idea of a second surgery to have these implants removed.”

It’s a major challenge for multiple reasons. In the human body, magnesium is an essential mineral that actually helps maintain the structural integrity of bones. Yet it also degrades quickly when exposed to oxygen, water and salts, all of which are abundant in the body. That combination of familiarity and reactivity, Sealy said, makes magnesium a prime candidate to become the primary ingredient in dissolvable screws, plates and other medical implants that could eliminate follow-up surgeries or a lifetime of aches during snowstorms.

Lake house to cardboard house

To reinforce magnesium against the rigors of the body long enough to serve as an implant, Sealy began experimenting with a technique called laser shock peening while a graduate student at the University of Alabama. “That process is equivalent to taking a hammer and hitting your car with it,” he said. “That would obviously put huge dents in it. I do the same thing, except that I do it with a laser – the laser’s my hammer – and I hit the implant to essentially make it harder and stronger.”

The laser shock peening helped magnesium withstand initial corrosion tests so well that Sealy began thinking of his dissertation results as “lake-house data, because it was so good that I was going to commercialize the technology and buy a lake house off those results.”

The promise of that data led to a National Science Foundation grant, which Sealy used to test the long-term corrosion of magnesium parts in a fluid that simulated the aqueous environment of the body. This time, the results were more sobering: The screws lost 50 percent of their strength after just one week and 80 percent after two weeks. Sealy quickly realized that peening only the surface of the magnesium parts wouldn’t suffice. “With that, I got ‘cardboard-house results,’” he admitted with a laugh. “That was a little depressing. But that was one of my big motivations for coming to Nebraska. I realized that if I (wanted) to control the degradation of these implants not just on the outer surface, but all the way through the life of the device, I needed to get somewhere with a 3D metal printer that would allow me to print these magnesium implants.”

Though he received multiple offers, Nebraska Engineering offered him the opportunity to help direct its purchase of three state-of-the-art 3D printers. Those printers eliminate virtually all of the oxygen, moisture and other impurities that could react with magnesium – a fairly rare capability in itself. But they also allow Nebraska engineers to construct components layer by layer, either by spraying down powdered layers with a nozzle or scraping powder layers across before melting them with a laser. That, in turn, enables Sealy and his colleagues to incorporate multiple materials or build intricate internal structures.

The other major benefit? Being able to apply various manufacturing treatments – including laser shock peening – to any or all of a part’s internal layers. “Instead of peening as a surface treatment, where I just hammer my outer surface, I’m going to print so many layers, and then hammer it, and then print a few more layers, and then hammer that,” Sealy said. “Then I can control corrosion all the way through these devices. This approach is essentially a way to print your own mechanical properties. It’s something that traditional manufacturing has never really had the ability to do before.

“What’s unique about our printer is that it’s the first one where they actually combined these hybrid- and reactive-printing capabilities. I would argue this is probably the most advanced hybrid-additive manufacturing facility in the world, just because our equipment is so rare.”

An example of the magnesium-based implants. (c) Craig Chandler / University Communication

Fade from you

With that level of customization at his command, Sealy is now experimenting to answer multiple questions: How does peening individual layers affect the corrosion rate of a resulting part? Could peening every fifth, 10th or 20th layer reinforce a part just as well as peening every layer? What’s the optimal concentration of magnesium vs. other metals? Do those outcomes change based on which technique prints the parts? “That’s kind of the fun part: figuring out what these rules of thumb are for the different printing technologies across different material systems,” he said.

Ultimately, Sealy said, the print-and-peen approach should help him design and construct magnesium implants that degrade at different rates inside the body. One model of clavicle plate or knee pin might degrade within a year, whereas another might dissolve over three or five years. “If you take me when I was in the fifth grade and broke my elbow, I was regenerating new bone tissue quickly,” Sealy said. “My bones were healing quickly, so I needed an implant that degraded quickly. If someone is a 75-year-old female with osteoporosis who maybe smoked her whole life, she doesn’t regenerate new bone tissue as fast. She may need an implant that degrades slowly. We can do that. Just by tweaking the way we manufacture it, we can make it degrade fast or slowly.”

Adjusting those rates via mechanical means, rather than by altering the composition of alloys or surface coatings, should also lessen the pain of wading through the eventual clinical trials and regulations of the FDA, he said.

Source: University of Nebraska-Lincoln